Scribe engraving machine model HA300

The HA300 scribe engraving machine, also known as a scratch engraving machine, is a tensile engraving machine.

Scribe engraving machine model HA300

Today, many automotive companies use scribe engraving machines to engrave vehicle chassis numbers. Other manufacturers of metal parts also use scribe engraving to engrave various types of product specification plates. In cases where there are restrictions regarding noise pollution, this method is a good alternative to impact engraving.

Suitable engraving tool Scribe Marker

The engraving tools of this device are 3, 4 and 6 mm impact tools (Indent) or traction tools (Scribe) that can perform engraving with air pressure of 1 to 6 bars. In other words, two types of engraving tools can be used for this device. Obviously, by changing the air pressure and the type of engraving tool, the engraving depth changes. The maximum engraving depth depends on the type of piece being engraved.

Silent operation of the scriber engraving machine

Scribe engraving is an alternative technology to impact engraving. The scribe engraving machine lowers the engraving needle onto the metal surface and moves in line with the design or writing received from the computer. As a result, with a continuous surface movement, the engraving operation is performed and the design and pattern are engraved on the metal surface. In other words, the pressure and pull of the engraving tool without hitting or rotating on the metal surface performs the silent engraving operation. The video below shows in detail how the Arian Sanat Hak scribe engraving machine is used. As is clear in the video, this machine has both scribe engraving capabilities and is capable of deep impact engraving on metal.

Application of Scribe Engraving Machine

As mentioned above, the main feature of this device is the ability to connect to a traction tool for silent engraving. Also, high accuracy and quality in engraving and the ability to engrave deeper (up to 2 mm) are other features of the scribe marker.

It should be noted that the high power of the tool during engraving causes the metal piece to move. As a result, for good quality engraving, a suitable fixture must be used to fix the piece.

Advantages of the device

• High-quality and silent engraving
• Deep engraving
• Switchable from scribe to tap
• Reasonable price

Disadvantages of the device

• Need a fixture to fix the part

Comparison of scribe engraving machine and impact engraving machine

The main difference between this machine and the impact engraving machine is the ability to install a 6 mm impact engraving tool (allowing deeper engraving) and a SCRIBE engraving tool (silent engraving), which is not possible in the HA110 model. It should be noted that the engraving speed in this model is lower than the impact machine model. Finally, the price of this model is relatively more expensive than the impact engraving machine. But it is cheaper than the fiber laser engraving machine. This machine is not easily portable. In cases where the machine needs to be constantly moved, a portable metal engraving machine should be used.